Write speeds for Configuration 2
Media USB Standard Bus Power
DVD-R 2x CLV
DVD-RW 2x CLV
DVD+R 2.4x CLV
DVD+RW 2.4x CLV
CD-R 4x CLV

CD-RW 10x CLV

This configuration is used when connecting two standard USB ports on the host to the standard USB port

and USB power

port on the drive.
Refer to the figure below during installation.

1. Turn on your computer.

2. Plug the standard USB connectors 3, 4 into the USB port of your computer.

3. Using the USB cable, insert the cable plugs1, 2 into the USB connectors of the drive.

Note: Be sure that you connect cable plug 2into the USB connector of the drive last.

Figure 1-2. Configuration 2: USB standard bus power configuration

1-8 USB 2.0 Super Multi-Burner Drive User’s Guide