Message/Symptom | FRU/Action | |
|
| |
Computer will not RPL from server | 1. Ensure that network is in startup sequence as first | |
|
| device or first device after diskette. |
| 2. | Ensure that network adapter is enabled for RPL. |
| 3. | Network adapter (Advise network administrator of |
|
| new MAC address) |
|
| |
Computer will not perform a Wake On LAN® (if applicable) | 1. Check power supply and signal cable connections | |
|
| to network adapter. |
| 2. | Ensure that the operating system settings are set to |
|
| enable Wake on LAN. |
| 3. | Ensure Wake On LAN feature is enabled in |
|
| Setup/Configuration (see “Starting the Setup Utility |
|
| program” on page 37) |
| 4. | Ensure network administrator is using correct MAC |
|
| address. |
| 5. | Ensure no interrupt or I/O address conflicts. |
| 6. | Network adapter (advise network administrator of |
|
| new MAC address) |
| 7. | Replace system board |
|
| |
Dead computer. See “Hard disk drive boot error” on page | 1. Power supply | |
49. | 2. | System board |
| ||
|
|
|
Diskette drive | 1. | Diskette drive |
when drive is active. | 2. | System board |
| ||
| 3. | Diskette drive cable |
|
| |
Blank screen except for flashing cursor. | 1. System board | |
| 2. | Primary hard disk drive |
| 3. | Hard disk drive cable |
|
| |
Incorrect memory size during POST | 1. Run the memory tests. | |
| 2. | Memory module |
| 3. | System board |
|
| |
"Insert a Diskette" icon appears with a | 1. System board | |
diagnostics diskette in the first | 2. | Diskette drive cable |
| ||
| 3. | Network adapter |
|
|
|
Intensity or color varies from left to right of characters | 1. | Display |
and color bars | 2. | Video adapter (if present) |
| ||
| 3. | System board |
|
| |
No power or fan not running | 1. See “Power Supply Problems” on page 49. | |
| 2. | Replace system board |
|
| |
1. Diskette drive | ||
2. | System board | |
| ||
| 3. | Diskette drive cable |
|
| |
Other display symptoms not listed above (including blank | 1. Display | |
or illegible display) | 2. | System board |
| ||
|
| |
Turn on indicator or hard disk drive | 1. Power switch/LED assembly | |
computer works correctly | 2. | System board |
| ||
|
|
|