Lenovo 4265, 4271 Removing and reinstalling the PCI card holder, Removing the PCI card holder

Removing and reinstalling the PCI card holder

Attention

Do not open your computer or attempt any repair before reading and understanding the “Important safety information” in the ThinkStation Safety and Warranty Guide that came with your computer. To obtain a copy of the ThinkStation Safety and Warranty Guide, go to: http://www.lenovo.com/support

This section provides instructions on how to remove and reinstall the PCI card holder.

To remove and reinstall the PCI card holder, do the following:

1.Remove all media from the drives and turn off all attached devices and the computer. Then, disconnect all power cords from electrical outlets and disconnect all cables that are connected to the computer.

2.Remove the computer cover. See “Removing the computer cover” on page 13.

3.Remove the front bezel. See “Removing and reinstalling the front bezel” on page 15.

4.Lay the computer on its side.

5.Press the two tabs 1 that secure the PCI card holder 2 inward, and then pivot the card holder to remove it from the chassis.

Figure 8. Removing the PCI card holder

16User Guide