![](/images/new-backgrounds/1102865/102865209x1.webp)
Table 37. Removal steps of LCD bezel assembly (continued)
2
2
2
2
2 | 2 |
2
2
3
When installing: Make sure that all the latches are attached firmly.
2020 LED sub card
For access, remove these FRUs in order:
•“1010 Battery pack” on page 60
•“2010 LCD bezel assembly” on page 96
Table 38. Removal steps of LED sub card Note: Some models do not have connector
1a .
2
1a
1
When installing: Make sure that the connectors are attached firmly and the card is installed as shown in this figure.