Lenovo 5057, 5063, 5065, 5059, 5053, 5044, 5061, 5041, 5051 Removing the power supply assembly screws

Figure 17. Removing the power supply assembly screws

5.Pivot the power supply assembly as shown and then lift the power supply assembly to remove it from the chassis.

Figure 18. Removing the power supply assembly

6.Make sure that the new power supply assembly is the correct replacement. Some power supply assemblies automatically sense the voltage, some power supply assemblies are voltage specific, and some power supply assemblies have a voltage-selection switch. If your power supply assembly has a voltage-selection switch, make sure that you set the voltage-selection switch to match the voltage available at your electrical outlet. If necessary, use a ballpoint pen to slide the voltage-selection switch to the correct position.

•If the voltage supply range in your local country or region is 100–127 V ac, set the voltage-selection switch to 115 V.

•If the voltage supply range in your local country or region is 200–240 V ac, set the voltage-selection switch to 230 V.

Chapter 2. Installing or replacing hardware 23