•How much energy is stored in the battery when you begin to work.
•The way you use your computer: how often you access the hard disk drive, how bright you make the computer display.
Using the ac power adapter
The power to run your computer can come either from the
The ac power adapter has two basic components:
1.The transformer pack that converts ac power for use with the computer.
2.The power cord that plugs into the ac outlet and into the transformer pack.
Attention: Using an improper power cord could cause severe damage to the computer.
Connecting the ac power adapter
To connect the ac power adapter, do the following:
1.Plug the power cord into an electrical outlet.
2.Connect the power cord to the transformer pack.
3.Insert the power jack into the computer.
Tips on using the ac power adapter
When using the ac power adapter, observe the following guidelines:
•When the ac power adapter is not in use, disconnect it from the electrical outlet.
•Do not bind the power cord tightly around the ac power transformer pack when it is connected to the transformer.
•Before you charge the battery, make sure that its temperature is at least 10°C (50°F).
•You can charge the battery when the ac power adapter is connected to the computer and the battery is installed.
Charging the battery
When you find that the battery power is low, you need to charge the battery or replace it with a fully charged one.
You are recommended to charge the battery in any of the following situations:
•When you purchase a new battery
•If the battery status indicator starts blinking
•If the battery has not been used for a long time
Notes:
•You are advised to install the battery pack when using your computer to prevent small particles from entering the inside of your computer.
•To maximize the battery life, do not start recharging the battery immediately after it drops from full charge.
•Charge the battery at a temperature between 50 °F and 86 °F (10
•Full charge or discharge is not required.
12User Guide
