Step 4 : Connecting HDMI/DVI to a TV

Connections

Connecting to a TV with HDMI Jack

Using an HDMI- HDMI cable(not included) connect the HDMI OUT jack on the rear of the DVD Recorder to the HDMI IN jack of your TV.

Press the input selector on your TV remote control until the HDMI signal from the DVD Recorder appears on your TV screen.

Caution

To audio on your TV when using HDMI, set the digi-

tal audio output to PCM (2 channel).(See page 37) Depending on the HDMI device(TV/HDMI Receiver)

you use, audio may not be supported. If TV does not support Dolby digital/DTS, Audio output is not available when you set Digital output as Bitstream or select DTS On in Audio setup menu. In this case, set the digital audio output to PCM or DTS Off.

24 - English

Page 24
Image 24
Samsung DVD-VR335 instruction manual Connecting to a TV with Hdmi Jack, To audio on your TV when using HDMI, set the digi