Samsung DVD-VR335 instruction manual Using the Markers, Playing back a Marker, Clearing a Marker

Playing back a Marker

Using the Markers	1 Press the	MARKER button during playback.
	2 Press the	œ √ buttons to select a marked scene.

(VR mode)

1Press the MARKER button during playback.

Marker ---- -- -- -- -- -- -- -- -- N : 0

SELECT RETURN

2Press the ENTER button when the desired scene appears.

Marker 01 - - - - - - - - -- N : 1

MOVE PLAY CANCEL RETURN

•The number 01 is displayed and the scene is memorized.

Marker 01 02 - - - - - - - -- N : 2

MOVE PLAY CANCEL RETURN

3Press the ENTER or √ll button to start playing from the selected scene.

•If you press the NEXT SKIP (√√l )button or the PREVIOUS SKIP(lœœ)button in marker mode,

and the next or current marked point plays for shorter than three seconds, playback starts from the previous marked point.

Clearing a Marker

1Press the MARKER button during playback.

Playback

3Press the œ √ button to move to the next position.

4Press the ENTER button again when the desired scene appears.

Marker 01 02 - - - - - - - -- N : 2

MOVE PLAY CANCEL RETURN

•The number 02 is displayed and the scene is memorized.

•DVD-RAM or DVD-RW (VR Mode) discs have the Marker function instead of the Bookmark function. The Marker function allows you to mark up to 99 scenes. Since the scenes may be dis- played as many different pages, numbering is necessary. If a disc in use is encoded with Disc Protect, Markers cannot be set or deleted. Only playback is available.

2Press the œ √ buttons to select a marked scene. Press the CANCEL button to delete the selected

mark.

Marker 01 02 03 04 05 06 07 08 09 10 √ N : 10

Marker 01 02 03 04 05 06 07 08 09 -- N : 9

MOVE PLAY CANCEL RETURN

•When a marker is cleared while DVD-RAM/ DVD-RW(VR mode) is playing, marker numbers will change. For example, if the 7th marker is cleared after ten markers are registered, the marker numbers after the eighth will automatical- ly move ahead by one and the 8th marker

becomes the 7th.

English - 53