Samsung DVD-VR335 instruction manual Connecting to Component video input jacks Y,PB,PR

Connections

Connecting to Component video input jacks (Y,PB,PR)

Connect Component video cables (not supplied) between the COMPONENT OUT (Y,P		B ,P R ) jacks on
DVD Recorder & VCR and COMPONENT IN (Y,P	B ,P R ) jacks on your TV.

COMPONENT

	Component Cable
	(not supplied)
green	green	Y
blue	blue	PB
red	red	PR

• You will enjoy high quality accurate color reproduction

images. Component video separates the picture

■ Compared to standard interlaced video, progressive

element	into black and White(Y), blue(P	B ), red(P R )
signals	to present clear and clean images.

• Connect audio cables(white and red) between the

Component AUDIO OUT jacks on the DVD Recorder &

VCR and Component AUDIO IN jacks on TV(or AV

Note

scan doubles the amount of video lines fed to your

TV, resulting in a more stable, flicker-free, and clear image than interlaced video. The progressive scan

video output jack is used in progressive output mode. This is only available with TVs that support progres- sive scan.

amplifier). (See pages 21 ~ 23)
• Progressive scan
- If the your TV supports Progressive Scan, you can
enjoy higher quality video by pressing the P.SCAN
button. (The component cable has to be connected.)
1. With the unit in stop mode, press the P.SCAN but-
ton on the front of the DVD Recorder & VCR.
2. The message ‘Press “Yes” to confirm Progressive
scan mode. Otherwise press “No”’ will appear.
Press the	œ √ buttons to select Yes, and then
press the ENTER button.

20 - English

■Progressive Scan Output (480p)

Consumers should note that not all high definition television sets are fully compatible with this product and may cause artifacts to be displayed in the picture. If you experience 480p progressive scan picture problems, it is recommended that you switch the con- nection to the ‘standard definition’ output. If there are questions regarding TV set compatibility with this model, please contact our customer service center at 1-800-SAMSUNG.

■The Component jacks will not output video resolutions above 480p. To view 720p and 1080i, connect the

DVD-VR 335 to your TV with an HDMI-HDMI cable. With HDMI connected, press the P.SCAN button to alter-

nate between all available resolutions. (See page 39)