Connecting the power cord (mains lead)
Insert the AC power cord (mains lead) into a wall outlet. The STANDBY indi- cator lights.
STANDBY/ ON
STANDBY
•If you press the 
OPEN/CLOSE button while the unit is in the standby mode, the power will turn on and the display will light up auto- matically.
•To use the unit with the other Onkyo Sepa- rate Collection series components, follow the connection diagram in the
Using the remote controller
The unit is not shipped with a remote controller. However, you can use a remote controller (RC-
Remote controller RC-414S/RC-456S
When the remote controller
Be sure to make the 
connection securely. If the connection is incomplete, you cannot use the remote controller to operate the unit.
Remote control 
sensor
30¡ 30¡ | 5m | |
| ||
|
|
The
Notes
•Place the unit away from strong light such as direct sunlight or inverted fluorescent light which can prevent proper operation of the remote con- troller.
•Using another remote controller of the same type in the same room or using the unit near equipment which uses infrared rays may cause operational interference.
•Do not put any object such as a book on the remote controller. The buttons of the remote controller may be pressed by mistake and drain the batteries.
•Make sure the audio rack doors do not have colored glass. Placing the unit behind such doors may prevent proper remote controller operation.
•If there is any obstacle between the remote con- troller and the remote control sensor, the re- mote controller will not operate.
Connections
11
