Connecting to the other components
Before connecting
•Do not connect the AC power cord (mains lead) until you complete all the other connections includ-
ing the connections on the next page.
•On each pair of connectors, a red connector (marked R) corresponds to the right channel, and a white connector (marked L) to the left channel. Connect white plugs of audio connection cables to L connectors and connect red plugs of audio connection cables to R connectors.
| (White) | Audio connection cable | To L connector |
To L connector | (White) | ||
To R connector | (Red) | (Red) | To R connector |
cable
REMOTE
CONTROL
L |
|
| COMPACT DISC CHANGERR | ||
|
| MODEL NO. | |||
DIGITAL OUTPUT | AC OUTLET | ||||
RATING: |
| ||||
| OPTICAL | AC 120V 60Hz | AC120V | 60Hz 14W | |
1 | 2 | UNSWITCHED |
|
| |
|
| 120W 1A MAX. | |||
|
| 3 | JAPAN | MADE IN JAPAN | |
ANALOG |
|
|
| ||
OUTPUT |
|
|
|
|
AC outlet
Improper connection
Insert completely
To wall outlet
Connections
Audio connection cable
| jacks | L R | DIGITAL IN |
|
| |
| CD |
| Optional Optical fiber | |||
|
| |||||
Amplifier without digital | MD recorder, CD recorder, | |||||
cable | ||||||
input terminal | 1 | DAT deck, etc. | 2 | |||
|
1Connecting to an amplifier
Connect the CD’s OUTPUT jacks and the amplifier’s CD input jacks using the audio connection cable. Refer to the amplifier’s instruction manual for connections.
2Connection to digital equipment, such as an MD,CD Recorder or DAT
Using the DIGITAL OUTPUT connector, you can record on digital audio equipment, such as an MD, CD recorder, DAT, etc. For digital recording, connect the equipment to either DIGITAL OUTPUT OPTICAL 1 or 2 connector using the optical cable (option). These connectors can also be used for connecting an amplifier which is equipped with a digital input connector.
A connector protection cap is attached to the digital output connector. Remove this cap to connect the unit to other digital equipment. When you are not using
the digital output connector, replace this cap.
3To AC OUTLET (UNSWITCHED)
The AC power cord of another component can be connected to this AC OUTLET connector.
This means that if the
Note
The shape, number, and total capacity of the AC outlets may differ depending on the area where the unit is purchased.
120 V, 60 Hz model: Capacity is 120 W in total.
9