Lenovo 70A69003NA manual Enabling Security and Creating an Administrator User, Disabling Security

Securing Your ix2 Network Storage and Contents

Enabling Security and Creating an Administrator User

With security turned on, only administrator users can view or change settings on the ix2, including creating or deleting users and Shares. When you create users, you limit access to your ix2 to specific people, and when you secure Shares, you limit data access to specific users.

1.On the Security page, click the switch on.

2.When you turn security on, you will be asked to create an administrator user. Provide a username and password, and then confirm your password.

3.Encryption is always available when you access your ix2 using https. By setting local encryption, you enforce encryption on your local network. By setting remote encryption, you enforce encryption outside your local network, such as through the internet. Choices for both encryption types are Not required, Passwords only (passwords are encrypted through https), and Always (encryption is always enforced). Always encrypting communication is safest, but can impact performance.

When security is turned on, browser communications with the ix2 are encrypted. Therefore, each computer that attempts to access the ix2 may encounter a security warning, which can be safely ignored. In addition, you may be asked to accept a signed certificate for the ix2 , which you should accept. If you change the device name at a later date, these warnings may appear again.

4.If you have your own security certificate, you can load it by selecting Use an imported certificate and browsing to the certificate to load it.

5.Click Apply to save your changes.

6.Click here to learn how to create users.

7.Click here to learn how to secure any existing or new Shares.

Disabling Security

Disabling security will cause all defined users to be deleted.

If you are using other features on your ix2 that require security, you cannot disable security until those features are also disabled.

1.On the Security page, click the switch off.

2.Disabling security will cause all defined users and groups to be deleted. Check the box to disable security.

3.Click Apply to save your changes.

Security is disabled.

Enabling Security and Creating an Administrator User 56