5. Press the cover-release button on the top of the computer cover, slide the cover
to the rear, and remove it. If your computer has screws to secure the computer
cover, remove the screws, and then remove the cover.
Accessing system board components and drives

You might need to remove the drive bay assembly to access system board

components such as memory, the battery, and CMOS.

To access system board components and the drives:

1. Remove the computer cover. See “Removing the cover” on page 9.
2. Remove the front bezel by releasing the three tabs and pivoting the bezel
outward from the top.
Figure 5. Removing the cover
Figure 6. Removing the bezel
10 Hardware Installation and Replacement Guide