Lenovo E74 manual Unpacking Procedu, Setup, Rerepacking, US-3, Install the monitor

US-3

UNPACKING PROCEDU

1.2.

3.4.

5.

SETUP

This monitor works with platforms running at horizontal frequencies between 30 and 69 kHz.

Step 1: Install the monitor

•To connect the tilt/swivel base to the monitor, align hooks with the sockets on bottom side of the monitor, and gently push the base towards the front of the monitor.

•Put monitor on a flat and stable working bench.

REREPACKING

Save the original box and all packing material for future shipping needs.

Step 2: Connect your monitor to your computer

•Turn off the monitor and computer and unplug the computer power cord before connecting. Connect the video signal cable to the video output of your computer

•The 15-pin D-shell signal connector on the signal cable will connect easily to the video adapter output on your personal computer. Tighten both screws on the connector to ensure a firm connection.

Note

•Do not touch the pins of the video signal cable connector as this might bend the pins.

•When connecting the video signal cable, check the alignment of the video input connector. Do not force the video input connector in the wrong way or the pins might bend.