Lexicon DC-2 owner manual Installation, The Remote Control

DC-2 Digital Controller Installation

The Remote Control

1 ON, FP and OSD

ON turns the DC-2 on and selects the input last used with main and Zone 2 volume levels set to the levels cho- sen in the OUTPUT LEVELS menu.

FP (ON) turns on the front panel display backlight and the Lexicon logo.

OSD (ON) activates the DC-2 on-screen display.

2 OFF, FP and OSD

OFF puts the unit into standby and mutes all of the outputs.

OSD (OFF) turns off the on- screen display.

FP (OFF) turns off the front panel display backlight and the Lexicon logo.

3 SELECT, ▲,▼ and DONE Allow access to and adjust- ment of all displayed menu items. ▲ and ▼ step a dis- play cursor through listed menu items. SELECT dis- plays submenus, or chooses a menu item for adjustment. The ▲ and ▼ buttons alter the settings of selected pa- rameters. DONE saves the current changes and exits the menu.

4 Shift

2	OFF		ON	1
	FP	FP	OSD
	OSD
3	Shift		Record
4	DONE	SELECT		5
6			Zone 2
	F	Light	V
7			O	8
	X
			L

Mute 9

VCR DVD VDisc TV

10

AUX CD Tuner Tape

Digital Controller

EFFECTS11

2 CH Party TV M Music

8 VOL ▲ and ▼

These controls display, then adjust the current master vol- ume level. The activated dis- plays (FP or OSD) will show the volume level and a visual guage.

When Mute is engaged, these controls display, then adjust the volume from the mute level. When full mute is en- gaged (⇑Mute), these con- trols increase or decrease the selected volume level with- out disengaging full mute.

9 Mute

Engages Mute and reduces the volume by the amount selected in the OUTPUT LEV- ELS menu. The red Mute LED on the front panel will light and the activated displays (FP or OSD) will show MUTE ON. Pressing again restores the volume to its pre-Mute level, turns off the front panel Mute LED, and displays MUTE OFF on the active displays.

10 Input Selection

Individual buttons select from 8 inputs and activate a corre- sponding green LED on the front panel. Depending on the Setup configuration, selection may also load a new effect.

When pushed in conjunction with other remote buttons, activates a set of less-used, but convenient, functions.

5 Record/Zone 2

When pushed in conjunction with other remote buttons, activates a set of Record/ Zone 2 control functions.

6 Light

Toggles the remote control backlight on and off. (Note: after seven seconds, the backlight is automatically turned off.)

7 FX ▲ and ▼

These controls display, then change the current effect. The activated displays (FP or OSD) will show the effect name.

11 EFFECTS

These controls select Dolby, THX, Logic 7, dts, 2-Chan- nel, Party, TV Matrix or Music playback. The actual effect is determined by the format of the input signal.

Note: When 2-Channel is engaged, pressing the but- ton again will turn it off.

3