Lexicon DC-2 Display Adjustment, The Video On-ScreenDisplay, System Configuration, Main Menu

DC-2 Digital Controller

System Configuration

Depending on the location of the DC-2 in your room, you may need to adjust the contrast of the front panel display for optimum viewing. To adjust this display, press the ▲, ▼ or SELECT buttons on the Remote to enter the Main Menu. Press ▼ twice to select DISPLAY ADJUST.

Press SELECT to highlight the Display Adjust Menu. Press ▼ to select

FRONT PANEL DISPLAY.

DISPLAY ADJUST MENU

ON-SCREEN DISPLAY

FRONT PANEL DISPLAY

Display Adjustment

MAIN MENU

EFFECT ADJUST

EQUALIZATION

DISPLAY ADJUST

SETUP

To adjust contrast, use SELECT to highlight CONTRAST ADJUSTMENT, and ▲ or ▼ to set the contrast of the display to its maximum as seen from your listening position. Press DONE twice to return to the main menu.

	FRONT PANEL DISPLAY	Adjust with ▲ or ▼
STATUS ALWAYS ON
		ALWAYS ON, 2 SECONDS, ALWAYS OFF
CONTRAST ADJUSTMENT			1-16

f you want to turn the front panel display off, use SELECT to highlight STATUS, then use ▲ or ▼ to select ALWAYS OFF. With software Version 4, you can select 2 SECONDS which will cause the display to shut off automatically two seconds after a command is received.

Press DONE twice to return to the main menu.

In addition to the front-panel display, the DC-2 contains a character genera- tor for a video overlay display on monitors. Since the on-screen display is capable of showing the full menu of options available at any point, calibra- tion of the system is faster and easier if the DC-2 video output is connected to a video monitor.

Adjustments to the on-screen display are made from the Display Adjust menu. To display this menu, press the ▲, ▼ or SELECT buttons on the Remote to enter the Main Menu. Press ▼ twice to select DISPLAY ADJUST.

Press SELECT to enter the Display Adjust menu. Press SELECT to open the On-Screen Display menu.

The Video On-Screen Display

MAIN MENU

EFFECT ADJUST

EQUALIZATION

DISPLAY ADJUST

SETUP

13