Lexicon DC-2 owner manual Controls and Indicators, Installation 1 Installation, The Front Panel

DC-2 Digital Controller

Installation 1 Installation

Controls and

Indicators

The Front Panel

7 8 9

DC-2 Digital Controller

LEXICON DC-2 COPYRIGHT 1999

ON/OFF VCR DVD V-DISC TV AUX CD TUNER TAPE REC/ZONE 2 EFFECT 2-CHANNEL MUTE

®

1 2 3 4 5 6

1. ON/OFF

ON/OFF alternately puts the DC-2 into and out of standby. Turning the DC-2 off with this button (or with the remote) deactivates the unit while leaving power to the signal processing circuitry to keep it at optimum operating tem- perature. Turning the DC-2 on with this button (or the remote) will restore the previ- ous operating state.

2.Input Selection Pressing any of these but- tons (VCR, DVD, V-DISC, TV, AUX, CD, TUNER, TAPE) selects the input for the main zone, and lights a green LED.

3. REC/ZONE 2

Press and hold to activate Zone 2 control with the On/ Off, Input Selector, Volume and Mute buttons..

Some sources are blocked because of the potential for feedback loops. By default these are TAPE and VCR. If a blocked source is selected, a message is displayed. This source blocking can be changed in the INPUT CONFIG menu.

4. EFFECT

Displays the current effect, then steps through the avail- able effects.

5. 2-CHANNEL

Engages the appropriate 2- Channel effect, and lights the amber front panel LED.

6. MUTE

Attenuates the main audio outputs, lights a red LED, and displays a screen message to indicate mute is engaged. The attenuation level can be set in the Setup: Output Lev- els menu.

7.IR Receiver and LED The IR receiver has an asso- ciated activity LED that lights green when valid IR signals are received, and an LED that lights red to indicate clipping at the inputs. An IR input jack is available on the rear panel for receipt of hard-wired sig- nals. The red LED remains illuminated when the unit is placed in standby.

8. Display

A 2x20 backlit LCD displays the result of user action and the current status. This dis- play can be turned off with the remote control.

9. VOLUME

Provides volume adjustment of the main outputs. Screen displays show a volume bar and level in dB unless the front panel display is turned off with the remote control.

1