3.Note the orientation of the socket cover. Align the notches the alignment keys 2 of the microprocessor socket.
1
of the microprocessor socket cover with
4. Install one side of the socket cover into the microprocessor socket as shown.
Figure 104. Installing the socket cover
Note: Your microprocessor socket and cover might look slightly different from the illustration.
5. Carefully press the other side of the socket cover downwards until the socket cover snaps into place.
Figure 105. Securing the socket cover
6.Carefully check the four corners of the socket cover to make sure that the cover is secured in the microprocessor socket.
7.Close the microprocessor retainer and then lower the lever to secure the retainer. Ensure that the lever is locked into position.
8.Follow any additional instructions included with the replacement part you received.