Appendix E. Notices
The Wake on LAN® function is set to Enable when your Lenovo computer is shipped from the factory, and the setting remains valid even when the computer is in Sleep or Standby mode. If you do not need to have Wake on LAN set to Enable while your computer is in Sleep or Standby mode, you can reduce the power consumption and prolong the time in Sleep or Standby mode, by switching the setting of Wake on LAN for Sleep or Standby mode to Disable. To switch the setting of Wake on LAN, go to Device Manager and do as follows:
For Windows XP:
1Click Start → Control panel.
2Click Performance and Maintenance → System.
3Click the Hardware tab, and click Device Manager.
4In the Device Manager window, expand Network adapters.
5
6Click the Power Management tab.
7Clear the Allow this device to bring the computer out of standby check box.
8Click OK.
