Lenovo LT2013P manual Using the On-Screen Display OSD controls

Using the On-Screen Display (OSD) controls

To adjust the settings, the user controls can be viewed through the OSD.

Brightness / Contrast / DCR

CancelOK

To use the controls:

1. Press to open the main OSD menu.

2.Use or to move among the icons. Select an icon and press to access the selected

function. If there is a sub-menu, you can move between options using				or	, then
press	to select that function. Use	or	to make adjustments then press		to save.

3.Press to move backwards through the sub-menus and exit from the OSD.

4.Press and hold for 10 seconds to lock the OSD. This will prevent accidental

adjustments to the OSD. Press and hold for 10 seconds to unlock the OSD and allow adjustments to the OSD.

5.Enables DDC/CI by default. Use OSD Exit Key, press and hold for 10 seconds to disable / enable DDC/CI function. A message "DDC/CI disable" is shown on the screen.

Chapter 2. 2-4