Chapter 2. Learning the basics
driver is installed, you can disconnect and reconnect the device without performing any additional steps.
Note: Typically, Windows detects a new device after connecting it, and then installs the driver automatically. However, some devices may require you to install the driver before connecting. Check the documentation provided by the device's manufacturer before connecting the device.
Before disconnecting a USB storage device, make sure your computer has finished transferring data by that device. Click the Safely Remove Hardware icon in the notification area of Windows to remove the device before disconnecting.
Note: If your USB device uses a power cord, connect the device to a power source before connecting it. Otherwise, the device may not be recognized.
Connecting
If your computer has an integrated Bluetooth® adapter, it can connect to other
Note: The actual maximum range may vary due to interference and transmission barriers. For the best possible connection speed, place the device as near to your computer as possible.
Enabling Bluetooth communication on your computerr
You must enable Bluetooth communication on your computer before pairing your computer with other
To enable Bluetooth communication on your computer:
1Press Fn+F5; a list of wireless features will be displayed.
2 Enable Bluetooth communication with a single click.
Note: When you do not need Bluetooth communication, disable it to save battery power.
Pairing your computer with other
The first time you connect your computer to another
1Enable Bluetooth communication on the device and set it to discoverable mode.
Note: Read the documentation supplied with the device for details.
15