Lenovo U400, U300S manual Solid State Disk U300s, Removal steps of solid state disk

Lenovo IdeaPad U300/U300s/U400 Hardware Maintenance Manual

1040 Solid State Disk (U300s)

For access, remove these FRUs in order:

•• “1010 Base cover (U300s)” on page 54

•• “1020 Battery pack (U300s)” on page 56

•• “1030 Speakers (U300s)” on page 57

Attention:

•Do not drop the solid state disk or apply any physical shock to it. The hard disk drive is sensitive to physical shock. Improper handling can cause damages and permanent loss of data.

•Before removing the drive, suggest the customer to backup all the information on it if possible.

•Never remove the drive while the system is operating or is in suspend mode.

Figure 4. Removal steps of solid state disk

Unplug two connectors in the direction shown by arrow 1, remove two screws 2, and then remove the solid state disk in the direction shown by arrow 3.

1

2

2

3

Step	Screw (quantity)	Color	Torque
2	M2 × 3 mm, flat-head, nylok-coated (2)	Black	1.5 ± 0.2 kgfcm

When installing: Make sure that the SSD connector is attached firmly.

58