Lenovo V360 manual Appendix A. CRU instructions, b aa aa b

Models: V360

1 58
Download 58 pages 15.31 Kb
Page 37
Image 37
b

Appendix A. CRU instructions

6If two SO-DIMMs are already installed in the memory slot, remove one of them to make room for the new one by pressing out on the latches on both edges of the socket at the same time. Be sure to save the old SO- DIMM for future use.

b

aa

aa

b

7Insert the notched end of the DIMM into the socket.

Press the DIMM firmly, and pivot it until it snaps into place. Make sure that it is firmly fixed in the slot and does not move easily.

8After aligning the attachment clips with their matching gaps, reinstall the compartment cover.

9Tighten the screw.

0Reinstall the battery.

ATurn the computer over, and reconnect the AC adapter and the cables to the computer.

To make sure that the SO-DIMM is installed correctly, do as follows:

1Turn the computer on.

2Hold F2 during startup. The BIOS setup utility screen opens. The System Memory item shows the total amount of memory installed in your computer.

33

Page 37
Image 37
Lenovo V360 manual Appendix A. CRU instructions, b aa aa b, Insert the notched end of the DIMM into the socket