Reinstall the battery pack.
Reinstall the compartment cover and tighten the screws.
9
0
A Turn the computer over again. Connect the AC adapter and the cables to the computer again.
b
7 Align the notch of the DDR3 SDRAM with the protrusion of the socket and gently insert the DDR3 SDRAM into the socket at a 30-45° angle.
8 Push the DDR3 SDRAM inward toward the socket until the latches on both edges of the socket are pushed into the closed position.
b
a
Appendix. CRU instructions
6If two DDR3 SDRAMs are already installed in the memory slot, remove one of them to make room for the new one by pressing out on the latches on both edges of the socket at the same time. Be sure to save the old DDR3 SDRAM for future use.
aa
42
