Random Play, Programmed Memory Play, Cd Operation

P LAY /P R OG

CD OPERATION

RANDOM PLAY

1.Press Random Button either in stop mode or normal play mode, the set will play all of the songs in random order. The Display will show some moving symbols like

“ ... ... ” every 5 seconds.

2.Press the Forward Skip/Search Button to skip to the next random song.

3.To resume normal play, press Random Button again.

PROGRAMMED MEMORY PLAY

Up to 16 tracks can be programmed for disc play in the order you like. Programming can only be done during STOP mode.

NOTE: Under some conditions you may be able to program more than 16 tracks.

PROGRAMMED (MEMORY) PLAYBACK

1. During STOP mode, press Prog/Repeat Button.

2. The Display will show “ ” and the Play/Prog Lamp will flash.

3.Press the Skip/Search Buttons either or until the desired track shows on the Display. The

	Play/Prog Lamp will flash.					P LAY /P R OG
4.	Press the Prog/Repeat Button. The Display will
	show “	” and the Play/Prog Lamp will flash.
5.	Repeat steps 3 and 4 until all the desired tracks are
	programmed.
	NOTE :For programmed tracks from 10th to 16th, the P LAY /P R OG
	display will separately show “				”, “	”,
	“	”, “	”, “	”, “	” and “	” .

6.When you finished programming, press the CD Play/Pause Button.

7.All songs will play in the order you programmed.

8.The Display will show the track number being played, and the Play/Prog Lamp will remain flashing during programmed play.

9.If in middle of play, you want to hear the next programmed song, press

the Forward Skip/Search .

10.When all the songs have finished playing, the set will stop. The Play/Prog Lamp turns off.

11.To turn off the power, remember to press Power Switch again, the Power/Batt.

Lamp will go off.

NOTE : Programming can only be done when the CD is in the STOP mode. (CD is in the set, Function Switch is in the CD position and Display shows the total CD tracks.)