TO PLAY A CASSETTE TAPE
OK 
NO
FULL | EMPTY |
REEL | REEL |
1.Open the Cassette Door by pressing the Cassette Stop/Eject Button (in some cases, you may have to press the Cassette Stop/Eject Button twice since this button has combined functions).
2.Insert the cassette tape, with the exposed tape facing downwards, into the tracks in the Cassette Door with the full reel on the left side, make sure the tape inside is not slack or loosely wound. If it is, insert a pencil into the reel and turn until the tape is wound up (see Page 11).
3.Close the Cassette Door.
4.Make sure the Function Switch is in the TAPE position and the Power Switch is ON (pressed down), the Power/Batt. Lamp will light.
5.Press the Cassette Play Button. The cassette tape will play till it reaches the end and then stop.
NOTE: If the Cassette Play Button does not stay down, your tape may have reached the end of the tape, reverse the tape or press Rewind .
6.Adjust the Volume Control and Bass Boost Switch to your listening preference.
7.To stop the tape manually, press the Cassette Stop/Eject Button.
8.To remove the tape, press the Cassette Stop/Eject Button again and the Cassette Door will open.
SIDE A | SIDE B |
To listen to the other side of the tape:
Remove the cassette tape, reverse it and
To shut the power off, press the Power Switch again, the Power/Batt. Lamp will go off.
12 |
| |
|
E
