PLAYING CD TRACKS IN PROGRAMMED OR
RANDOM ORDER PROG./REPEAT
PLAY/PAUSE 
BACKWARD |
FORWARD |
RANDOM
1. Programmed Play
You can make a program of up to 16 tracks in the order you want them to be played.
1.Slide the FUNCTION switch to CD position. Make sure the CD is stopped.
2. Press the PROG./REPEAT button. The letters “ 
” will show and the PLAY/PROG. lamp will flash.
3.Press 
or 
to select the tracks you want to program in the order you want.
4. Press the PROG./REPEAT button to confirm. The
letters “ 
” will show and the PLAY/PROG. lamp will flash.
5.Repeat above steps 3 and 4. You can program up
to 16 tracks (the display will show “ 
”, “ 
”
… “ 
” for program number 11 to 16).
6.Press 
to start programmed play. The PLAY/ PROG. lamp will flash.
NOTE:
1.Programming can only be done in STOP mode.
2.The programmed memory will be lost if the power is shut off or the CD door is opened.
To cancel the current program
Just create a new program following the programming procedure.
To cancel Programmed Play
Press the STOP button, then slide the FUNCTION switch to TAPE position.
2. Random Play
To play the songs in random order
Press the RANDOM button in STOP mode or during playing, the set will play all
of the songs in random order. The floating symbol “ 
” and the current track number will show in turn in the display.
To resume normal play
Press the RANDOM button again, the player will start playing normally.
10
