ATTACHING THE SPEAKERS
NOTE: The right and left speakers are NOT interchangeable. The right speaker fits only on the right side (as shown in FIG. 1). The left speaker fits only on the left side.
1.Bring the right speaker to the right side of the set.
2.Raise the right speaker box about 4 inches above the set. Align the tracks (rails).
3.Fit speaker over the side rails.
4.When speaker fits over the rails, lower the speaker as shown in FIG. 2, and make sure the tabs snap into the speaker box (locks in the back).
5.Repeat above steps 1 to 4 for the left speaker box.
FIG.1
FIG.2
6.Carefully unwind the speaker wire from behind each speaker box and plug the right plug into SPEAKER JACK R, also plug the left plug into SPEAKER JACK L (as shown in FIG. 3). Wrap the remaining wire behind each speaker box.
FIG.3
LOCK TAB
NOTE: This set can be used with speaker boxes attached to the main set or separated, just make sure both speaker plugs are plugged into the jacks.
To remove the speakers, press the lock tab and raise the speakers.
6 
