REMOTE CONTROL PREPARATION
Battery Installation
Remove the BATTERY COMPARTMENT DOOR of the REMOTE CONTROL and insert 2 size “AAA” alkaline batteries (included) according to the + and - markings inside the BATTERY COMPARTMENT of the REMOTE CONTROL unit.
Remote Control Operation Range
Point the REMOTE CONTROL unit from less than 20 feet from the remote control sensor and within about 600 of the front of the DVD player (not your TV set).
Tips on Battery Use
•Reversing polarities will damage the batteries and possibly your REMOTE. Be sure to follow polarity ( + and
•Do not mix different types together (Alkaline,
•When not in use for an extended period of time (over 60 days) remove the batteries to prevent possible acid leakage or corrosion resulting in damage to your remote.
•When the batteries have become discharged, they must be disposed of in a safe manner that complies with all applicable laws.
•Installation of batteries should only be done by an adult (for safety).
REMOTE SENSOR RANGE
®
!
!
within20feet
Remember to point the REMOTE CONTROL in the direction of the DVD player, not the TV.
Point the REMOTE CONTROL in the Right Direction
When you want the remote to operate the DVD player, point the remote at the DVD player, not the TV. The Remote has to be pointed in the correct direction and toward the correct component (DVD player) in order for the remote control’s signal to communicate with the remote sensor on the DVD player. Make sure there is a clear path between the remote control and the DVD player so the signal is not blocked.
Tips on REMOTE CONTROL operation
•The operating distance may vary according to the brightness of the room.
•Do not point bright lights at the remote control sensor.
•Do not place objects between the remote control unit and the remote control sensor.
•Do not use this remote control unit while simultaneously operating the remote control unit of any other equipment.
11 |
| |
|
