Lenoxx Electronics DVD-2002 Setting Language OSD MENU, SUBTITLE, Audio and DVD Menu

INITIAL SETTING

NOTE: Most people will not adjust the following functions and will go directly to Page 18 for basic play.

Once the initial programming is entered, it is retained in memory until changed. The player will always be operated under the same conditions even if the set is shut off.

Common procedure for initial settings is as follows:
1 Press SETUP button in the stop mode, a menu like below will appear on your TV.	2&4
	(DIRECTION
	BUTTONS)

3&5

(SELECT

BUTTON)

1&6

(SETUP

BUTTON)

2

3

Move the DIRECTION buttons ( & ) to select the preferred item.

Press SELECT button, and a sub-screen will open. Each screen for setting the value is displayed (SELECT button is similar to an ENTER

button on a computer). UP

4

5

6

Move the DIRECTION buttons ( ,, & ) to select what you want to change.

Press SELECT button to confirm (this is like the “ENTER” button on a computer).

Press SETUP button to close the initial menu and return to STOP mode.

LEFTRIGHT

SELECT

DOWN BUTTON

Setting LANGUAGE (OSD MENU, SUBTITLE, AUDIO AND DVD MENU)

1 After entering the initial setting, move the DIRECTION buttons ( , , & ) to select the “Language”.

NOTE: OSD stands for “ ON SCREEN DISPLAY ”.

UP

2Press the SELECT button to open language menu.

3 Move the DIRECTION buttons ( , , & ) again to select “OSD MENU”, then press SELECT button to open submenu of OSD.

4Select the language you want for your OSD using the UP & DOWN buttons (,), press SELECT button to confirm.

5Follow the above 3-4 steps to set the languages for subtitle, audio and DVD Menu.

6To exit the language setting menu, press the UP button to return back to the initial setting menu, or press SETUP button to close initial setting directly.

LEFTRIGHT

SELECT

DOWN BUTTON

NOTE: The factory settings for LANGUAGE is English.

15 IB-DVD-2002-WC-ZR-E-V1