Important Directions

1 - Keep the furnace area clear and free of combustible material, gasoline, and other flammable vapors and liq( uids. If installed in an insulated area, furnace must be kept free of insulating material. Insulating material may be combustible. Inspect furnace venting system to make sure it is in place, physically sound, and without holes, corrosion, or blockage. Inspect furnace return air duct connection to ensure duct is sealed to the fur( nace and terminates outside the space containing the furnace. Inspect the physical support of the furnace to guarantee that it is sound without sagging, cracks or gaps around base and it maintains seal between base and support.

2 - DO NOT obstruct air flow to unit. Unit must receive an unobstructed flow of combustion and ventilating air.

3 - DO NOT store chlorine or fluorine products near unit or introduce these products into the combustion air. These products can cause furnace corrosion.

4- DO NOT draw return air from a room where this furnace, or any other gas appliance (ie., a water heater), is installed. When return air is drawn from a room, a negative pressure is created in the room. If a gas appliance is operating in a room with negative pressure, the flue products can be pulled back down the vent pipe and into the room. This reverse flow of the flue gas may result in incomplete combustion and the formation of carbon monoxide gas. This toxic gas might then be distributed throughout the house by the furnace duct system.

Your furnace is a gas appliance. It is critical that the gas

supplied to the unit be completely burned to avoid the pro(

duction of carbon monoxide gas. Complete combustion of the gas requires, but is not limited to, correct gas pres( sure and gas flow rate, adequate combustion air, and proper venting.

WARNING

Carbon monoxide gas is invisible, odorless, and toxic.

Exposure to this gas can cause personal injury and even death to all occupants, including pets. Any item

that is powered by or gives off heat from a combustion process (including lawn mowers, automobiles, and fire(

places) has the potential to produce carbon monoxide

gas. Because of this, Lennox recommends the use of a carbon monoxide detector in your home, even if you do not own gas appliances. Reliable detectors

are available at reasonable retail prices. Contact your

independent Lennox dealer for more details about this

investment in your safety.

Your furnace is designed to meet standards set by nation(

al agencies, and to operate safely when properly installed and maintained. However, the unit's performance can be

greatly impacted by the individual installation and the op( erating environment. It is your responsibility to ensure that this appliance is maintained. Proper maintenance is

critical for your safety and the satisfactory operation of the

product. Lennox strongly recommends annual in,

spection and maintenance of this appliance. Contact

your independent Lennox dealer for an inspection by a

qualified service technician.

Lighting Information and Operation

WARNING

If you do not follow these instructions exactly, a fire or explosion may result causing property damage, personal injury or loss of life.

BEFORE LIGHTING smell all around the appliance area for gas. Be sure to smell next to the floor because some gas is heavier than air and will settle on the floor.

Use only your hand to push in or turn the gas control knob. Never use tools. If the knob will not push in or turn by hand, do not try to repair it, call a qualified service technician. Force or attempted repair may result in a fire or explosion.

To place G24M furnace into operation:

G24M units are equipped with an electronic ignition system. Do not attempt to manually light burners on these furnaces. Each time thermostat calls for heat, the burner will automatically light.

Gas Valve Operation (Figures 2 and 3)

1 - STOP! Read the safety information at the beginning of this section.

2 - Set thermostat to lowest setting. See figure 1.

THERMOSTATS

FIGURE 1

3 - Turn off all electrical power to appliance.

4 - This appliance Is equipped with an ignition device which automatically lights the burner. Do not try to light the burner by hand.

5 - Remove the access panel.

Page 3

Page 2 Page 4
Page 3
Image 3
Lenoxx Electronics G24M Series manual Important Directions, Lighting Information and Operation, Thermostats
Page 2 Page 4

G24M Series specifications

Lenoxx Electronics has made significant strides in the consumer electronics market with the introduction of the G24M Series, a line that caters to both functionality and style. This series is designed with a keen focus on delivering high-quality audio and visual experiences, making it an appealing choice for diverse users.

One of the standout features of the G24M Series is its advanced sound technology. Utilizing cutting-edge audio engineering, these products provide crystal-clear sound quality that enhances the overall listening experience. Whether it’s for casual listening at home or for hosting gatherings, users can expect deep bass and crisp treble across and a well-balanced sound profile. This makes the G24M Series especially suitable for music lovers and movie enthusiasts alike.

In terms of connectivity, the G24M Series is equipped with Bluetooth capabilities, allowing for seamless pairing with various devices. This means users can easily connect their smartphones, tablets, or laptops without the hassle of wires. The inclusion of NFC technology further simplifies this process, enabling instant connectivity for compatible devices with just a tap.

The G24M Series also shines in its design. With a modern aesthetic that combines elegance and practicality, these audio devices are designed to complement any home décor. Their compact size allows for easy placement in any space, without compromising on performance. Each unit is built with durable materials, ensuring longevity and reliability for everyday use.

User-friendliness is another hallmark of the G24M Series. The intuitive interface features easily accessible buttons and controls, providing a hassle-free experience when adjusting settings. This is particularly beneficial for those who may not be tech-savvy, as it eliminates confusion during operation.

Furthermore, energy efficiency is a key characteristic of the G24M Series. With low power consumption features, these products not only minimize environmental impact but also help users save on energy costs.

Overall, the Lenoxx Electronics G24M Series stands out with its compelling blend of innovative features, superior sound quality, stylish design, and user-centric approach. It represents a wise investment for those looking to elevate their audio experience, offering both functionality and elegance in a modern package.
Top Page Image Contents