Lenoxx Electronics HT-377 TV + DVD CONNECTIONS

IB-HT377-WM-E-050405

1. Insert the stereo audio cables (included) into the DVD INPUT LEFT and RIGHT jacks on the

back of your HOME THEATER SYSTEM, and into the corresponding AUDIO output jacks

on your DVD player, this will allow your DVD’s sound to play through your HOME THEATER

SYSTEM.

2. Insert the video cable into the VIDEO OUT jack on the back of your DVD player and into

the VIDEO IN jack on the back of your TV set. This is especially convenient if your TV has

several inputs.

3. Insert the AC power cord into an AC outlet.

4. Make sure the POWER switch on the back of the main set is at “ON” position. Next press

the ON/STANDBY button on the front of the main set or on the REMOTE CONTROL to

switch the set on (or standby).

5. Press the SOURCE button till the DVD indicator lights.

NOTE:The factory’s default input source is DVD. When the set is turned to ON, the DVD

indicator will be on, press the SOURCE button to turn on the MP3 indicator if you use

the 3.5 mm plug audio cable.

6. Go to Page 15 for other detailed instructions.

NOTE:Your cable or antenna connection to your TV is not touched with this connection.

Leave your antenna cable to your TV as you normally would. No changes will be made

to your current antenna connections.

TV + DVD CONNECTIONS

CONNECT THE SPEAKERS AS SHOWN ON PAGE 8 (OR THE QUICK SETUP DIAGRAM SHEET).

RIGHT LEFT

AUDIO

DVD

INPUT

MP3

AUX

INPUT

NOTE: On some TVs, this

jack is in the front.

NOTE: Some newer TV sets have several VIDEO

INPUT jacks. You may use one of these for your DVD

player and the others for connecting to the VIDEO OUT

jacks of the component. If your set is older and only has

a single VIDEO INPUT jack, you may buy a switch box

to change the video of DVD and Game.

IB-HT377-WM-E-050405.pmd 6/2/2005, 2:15 PM12