IB-HT377-WM-E-050405
1. Insert the green 3.5 mm audio cable (included) into the MP3/AUX INPUT jack on the back
of your HOME THEATER SYSTEM, and into the corresponding AUDIO output jack on
your MP3, PC, CD player, or other device, this will enable you to hear your components
system through your HOME THEATER SYSTEM.
2. Insert the AC power cord into an AC outlet.
3. Make sure the POWER switch on the back of the main set is at “ON” position. Next press
the ON/STANDBY button on the front of the main set or on the REMOTE CONTROL to
switch the set on (or standby).
4. Press the SOURCE button till the MP3 indicator lights.
NOTE:The factory’s default input source is DVD. When the set is turned to ON, the DVD
indicator will be on, press the SOURCE button to turn on the MP3 indicator.
5. Go to Page 15 for other detailed instructions.
MP3/AUX CONNECTIONS
CONNECT THE SPEAKERS AS SHOWN ON PAGE 8 (OR THE QUICK SETUP DIAGRAM SHEET).
RIGHT LEFT
AUDIO
DVD
INPUT
MP3
AUX
INPUT
YOUR PC, CD, MP3 PLAYER OR
ANY RADIO OR OTHER SOURCE
WITH 3.5MM STEREO JACK
14
IB-HT377-WM-E-050405.pmd 6/2/2005, 2:15 PM15