Lenoxx Electronics HT-377 TV + TV GAME OR VIDEO CAMERA CONNECTIONS

IB-HT377-WM-E-050405

RIGHT LEFT

AUDIO

DVD

INPUT

MP3

AUX

INPUT

RED WHITE

RED

WHITE

VIDEO OUTPUT

VIDEO CAMERA

TV GAME

1. Insert the stereo audio cables (included) into the DVD INPUT LEFT and RIGHT jacks on the

back of your HOME THEATER SYSTEM, and into the corresponding AUDIO output jacks

on your TV Game or Video Camera, this will allow your TV Game or Video Camera’s

sound to play through your HOME THEATER SYSTEM.

2. Insert the video cable into the VIDEO OUT jack of your TV Game or Video Camera player

and into the VIDEO IN jack on the back of your TV set. This is especially convenient if

your TV has several inputs.

3. Insert the AC power cord into an AC outlet.

4. Make sure the POWER switch on the back of the main set is at “ON” position. Next press

the ON/STANDBY button on the front of the main set or on the REMOTE CONTROL to

switch the set on (or standby).

5. Press the SOURCE button till the DVD indicator lights.

NOTE:The factory’s default input source is DVD. When the set is turned to ON, the DVD

indicator will be on, press the SOURCE button to turn on the MP3 indicator if you use

the 3.5 mm plug audio cable.

6. Go to Page 15 for other detailed instructions.

TV + TV GAME OR VIDEO CAMERA CONNECTIONS

CONNECT THE SPEAKERS AS SHOWN ON PAGE 8 (OR THE QUICK SETUP DIAGRAM SHEET).

NOTE: On some TVs,

this jack is in the front.

NOTE: Your TV Game or Video Camera

may have a special cable (with a triple

3.5mm plug on one side) for

connections. This diagram is only for

illustrations.

NOTE: If your TV set has several VIDEO

INPUT jacks, you may connect your TV Game

or Video Camera cable to one of your TV’s

VIDEO INPUT jacks directly.

IB-HT377-WM-E-050405.pmd 6/2/2005, 2:15 PM14