3-6. Using an External SD/MMC Memory Card (Optional - not included)

1.Turn off the player. Open the back cover, see diagram below.

2.Confirm the card is SD/MMC type and insert the card correctly as indicated in the diagram, then close the battery cover box.

2 1

Fig. 3-6-1 Using the External SD/MMC Memory Card

3.Turn on the player. It will play the music on the SD/MMC card automatically, the

memory icon will show in the display (card play).

4.If you want to listen to the music on the built-in flash memory, please press and hold the MODE switch to enter the menu and then turn the MODE switch to the left to select the FLASH MUSIC, press the MODE switch to confirm. The memory icon

changes to . Press the PLAY button to start to play the music on the built-in

flash memory.

Flash memory in use

I Love You

Fig. 3-6-2 Selecting the Built-in flash memory

NOTE 1: The external SD/MMC card requires a fully charged or fresh battery to operate, so please change to a new battery if you can’t power on when you are using the external SD/MMC card.

NOTE 2: Be sure to turn off the MP3 player before inserting or removing the SD/MMC card. If your set is on, it may cause some data to be lost or the set to freeze or become inoperative. If this should happen, please take out the battery for 1 minute, then replace it and restart the MP3 player.

17IB-MP456-WC-E-030206

Page 18
Image 18
Lenoxx Electronics MP-456 operating instructions Using an External SD/MMC Memory Card Optional not included