Lenoxx Electronics PDV-705 instruction manual IB-PDV705-WM-E-010506.pmd26 2006, 924 AM

Models: PDV-705

1 30
Download 30 pages 11.41 Kb
Page 26
Image 26

TROUBLE SHOOTING

Symptom

Remedy

General

The picture seems squeezed or stretched.

No sound from your TV or speakers.

The color buttons have no function or have less function.

The REMOTE CON- TROL unit does not work.

No rapid advance or rapid reverse play.

Cabinet vibrates or hums.

A specific disc does not play.

The player’s controls don’t work or the player can not work properly.

The LCD mode and TV type you are in may be wrong for this movie, try changing the LCD and TV type setting for standard or widescreen. See pages 20 & 21.

1.Press AUDIO button several times. The disc may have been set to DTS output or a blank audio channel on multiple language, please select AC-3 output or reset to the main language (refer to page 11).

2.Adjust the DVD player’s volume.

3.Make sure the AUDIO output connection and setting are correct. See details on page 22.

4.Ensure that the equipment is connected properly.

5.Ensure that the input setting for the TV and stereo system are correct.

6.Adjust volume setting on your TV’s remote.

7.Make sure the headphones are detached from the DVD player.

8.The movie is paused, press play.

9.The movie is in search or fast play or other speed related play. There is no sound in these cases. Only normal play has sound.

The disc you used is a copied one, please replace it with a fresh original disc.

1.Check that the remote’s batteries are installed correctly.

2.The remote’s batteries are weak or depleted, replace them with new ones (refer to page 8).

3.Point the remote control unit at a distance of less than 20 feet (6m) from the DVD player.

4.Remove any obstacles between the remote control unit and remote control sensor, also make sure the lens on the remote is not dirty.

Some discs may have sections which prohibit rapid advance (or rapid reverse), especially on opening screens or during FBI warnings.

This is normal for high speed reading of DVD discs.

1.The disc may be dirty, try cleaning the disc.

2.Make sure the disc is not upside down.

3.The region code is not 1, in this case, the disc can not be used.

4.Disc may not be industry standard or it may be an illegal copy. Only use legally sold movies not pirate copies.

Set needs to be reset.

Reset the DVD player by removing the battery pack and discon- nect AC adaptor for 1 minute, then replace to reset. (The player may not be operating properly due to lightning, static electricity, damaged or wrong discs, or some other external factors).

25

IB-PDV705-WM-E-010506

 

IB-PDV705-WM-E-010506.pmd26

4/3/2006, 9:24 AM

Page 26
Image 26
Lenoxx Electronics PDV-705 instruction manual IB-PDV705-WM-E-010506.pmd26 2006, 924 AM