Lenoxx Electronics PH559 Wall Mounting, Slide OUT Reverse Replace Into Phone

WALL MOUNTING

Your PH-559 can be mounted on a wall phone plate. If you do not have a modular wall phone plate installed, please consult with your phone company or installer to get one, or see next page for installation without a wall plate.

1.HANDSET CLIP - When the phone is mounted on the wall, the HANDSET CLIP must be adjusted so it will hold the HANDSET.

A. SLIDE OUT B. REVERSE C. REPLACE INTO PHONE

2. To use as a wall phone, you must use the	FOR WALL USE, PUT ADAPTOR HERE
plastic (box shape) WALL MOUNT ADAPTOR.

3. Use the SHORT STRAIGHT WALL CORD, and plug one end into the rear of the phone. Route the cord into the channel at the phone bottom.

4. Plug the other end of the SHORT STRAIGHT WALL CORD into the WALL JACK.

5. Put the phone over the WALL PLATE, make sure both posts fit into slots on the back of the phone. Then slide the phone down to lock the phone onto the WALL PLATE.

14IB-PH559(9803C)-WM-E-042602