Lenoxx Electronics PH559 Caller ID Features, Calling Back From the Caller ID List

CALLER ID FEATURES

Calling Back From the Caller ID List

1.Display the phone number you want to call back using the UP or DOWN button.

2.Press the DIAL button, the phone number will show on the display.

3.Press the OPTION button to choose the number of call-back digit to be dialled out (7 digits - phone number by itself, or 10 digits - area code + phone number, or 11 digits - 1 + area code + phone number), different parts of the country have different dialing systems even for local calls.

4.Pick up the HANDSET or press the SPEAKER button.

5.Press the DIAL button, the phone will dial the number displayed.

Storing the Phone Numbers from the Caller ID List

As the phone keeps the data of up to 70 calls, if the 71st call comes in, the phone deletes the oldest data automatically.

To prevent important data from being deleted, you can store them into the 13 speed dial memories (3 one-touch or 10 two-touch).

1.Display the phone number you want to store (by pressing UP or DOWN button).

2.Press STORE button. The call number is repeated in the display.

3.Press the OPTION button to change the memory dial digit (7-digit, 10-digit or 11- digit).

4.For one-touch memory

Press a one-touch speed dial button (M1 to M3).

For two-touch memory

Press the AUTO button, and then one of the speed dial memories (0 to 9).

The phone number is now stored in that memory button (NOTE: Only the number will be stored, not the name).

NOTE:

1.Do not allow more than 3 seconds to elapse between each step of the procedure.

2.If the phone is connected to a Private Branch Exchange (PABX), you may need to add an outside line access digit or a pause, see page 10.

12IB-PH559(9803C)-WM-E-042602