TROUBLE SHOOTING (continued)
PROBLEMS
Static noise on line or cannot hear calling party or calling party cannot hear you.
REDIAL does not work.
Feedback or squealing when using SPEAKERPHONE.
appears in the display.
Cannot erase all records in memory.
Caller ID displays words like
| , | or |
or | . |
|
Memory Dialing does not work.
Handset falls out of phone base when wall mounted.
Caller’s information is not registered to the Caller ID memory.
Message Waiting does not work.
•Make sure the handset cords connected properly. Or, replace the COILED HANDSET CORD. Any phone store has these cords in different lengths. After some time the cord may have become overstretched or damaged.
•Check if 
shows in the display. Since the REDIAL/PAUSE button has combined function (pause function), the phone may have been paused. Just press the HOOK switch.
•Volume is too high. Reduce the SPEAKER- PHONE VOLUME control setting.
•You picked up the phone before the second ring, or your phone received unclear call information. Static can cause this message.
•If this condition persists, contact your local telephone company to ensure that there is no problem with your phone line.
•To erase ALL call records, make sure the phone is not in use, press the DELETE button and hold for 3 seconds, the display will show “DELETE ALL?”, press the DELETE button again.
•Your language is set for French or Spanish, reset the language to English (see page 9).
•Check if you have stored the numbers correctly by pressing that memory location button(s).
•Handset clip was not installed properly for wall use. See page 14 for details.
•The caller may have an unlisted or blocked number to prevent Caller ID identification, or it may be an overseas call or you may have noise on the line during that call.
•Check with your telephone company if this service is available and if you have subscribed for it.
16IB-PH568-WM-E-040506
7/4/2006, 4:28 PM
