Leupold 56113 operating instructions Cleaning

Models: 56113

1 18
Download 18 pages 16.84 Kb
Page 6
Image 6
CLEANING

3

2.View an object about 100 yards in the distance.

3.Cover the left objective lens with your hand.

4.Adjust the center focus wheel (located between the two barrels) until the image presented to your right eye is clear and sharp.

5.Cover the right objective lens with your hand.

6.Adjust the diopter adjustment dial until the image presented to your left eye is clear and sharp.

7.Push down the lockable diopter adjustment dial so that it locks into place. Your binocular is now focused for your eyesight.

To make any adjustments in the field, simply turn the center focus dial while viewing through both barrels.

CLEANING

You can clean the fully armored body by simply wiping off any accumulated dirt or dust.

Clean the lenses as you would a camera lens. For optimal cleaning, use the Leupold Lens Cleaning System. Begin by using the brush to whisk away dust. Then use the microfiber cleaning tip, which is impregnated with a special non-liquid cleaning compound, to clean the glass. If you don’t have a Leupold Lens Cleaning System, use a standard lens brush to remove dust and then pure alcohol, high-grade glass cleaner, or pure water on a cotton swab.

Page 6
Image 6
Leupold 56113 operating instructions Cleaning