LevelOne FBR-1700TX, FBR-1100TX, FBR-1400TX, FBR-1401TX Other Unix Systems

PC Configuration
49
LevelOne Broadband Router's IP
address
192.168.0.1Remote Host
Note:
If you have made a host file entry, you can use the name from the
host file instead of the IP Address.
Remote Queue Ln
Where n is the Logical Printer number
(L1, L2, L3). Logical Printers can be
configured on the LevelOne Broadband
Router's Options- Printer Port screen.
L1
4. Save this data, and exit the Printer Configuration. Configuration is now completed, and the
printer is now available for use.
Other Unix Systems
Internet Access
• Ensure the "Gateway" field for your network card is set to the IP Address of the LevelOne
Broadband Router.
• Ensure your DNS (Name Server) settings are correct.
Printing Setup
This section is not applicable to LevelOne Broadband Routers which do not
have a Printer Port.
The FBR-1401TX and the FBR-1700TX LevelOne Broadband Routers support LPD Printing
under Unix.
To use LPD printing to the LevelOne Broadband Router's printer, install an LPD printer using
the standard procedure for your system.
• Use the LevelOne Broadband Router's IP Address as the location of the remote host
• Use L1, L2, or L3 for the name of the printer on the remote host.
On the LevelOne Broadband Router, the logical printers (L1, L2, and L3) can be configured on
the Advanced - Printer Port screen. . See Printer Port in Chapter 8 - Advanced Configuration
for details.