LevelOne FCS-1000 user manual WEP Screen WCS-2000 only, Data WEP Screen, WEP Encryption

WEP Screen (WCS-2000 only)

This screen is accessed by clicking the Configure WEP button on the Network screen. An example WEP screen is shown below.

Figure 24: WEP Screen

Data - WEP Screen

WEP Encryption

WEP Encryption	Select the option used on your Wireless LAN.
	• None - This is the default. If selected, data is NOT encrypted
	before being transmitted.
	• 64 Bit Encryption - If selected, data is encrypted, using the
	default key, before being transmitted.
	You must enter a default key.
	Other Wireless stations must be set to use 64 Bit Encryption, and
	have the same Key value in the same position in their key table.
	• 128 Bit Encryption - If selected, data is encrypted, using the
	default key, before being transmitted.
	You must enter a default key.
	Other Wireless stations must be set to use 128 Bit Encryption, and
	have the same Key value in the same position in their key table.
Passphrase	The Passphrase feature will generate a Key from the phrase you enter,
	which may be easier than entering keys in Hex (0~9 and A~F).
	To use the Passphrase feature, enter the desired Passphrase in the field
	provided, and click the Generate button.
Default Key	Select a key to be used as the default key.
Key Value	If WEP Encryption is used, you must enter at least one key value, for
	the Default Key. All transmissions are encrypted using the Default Key.
	Other wireless stations must use the same key value in the same
	position in their key table. (It does not have to be selected as the default
	key.)
	25