LevelOne MUS-2500 user manual External Button and USB HUB, Set the external button

Chapter 10 External Button and USB HUB

MUS-2500 Smart USB Storage includes an external button which can be applied to do the Backup job and Hub copy job. So, just one touch, the SmartUSB utility will perform the backup job based on the rules you define or copy the data from the pen drive or the card reader connected to the enclosure. If you want to stop the running-copy job, you can touch the external button again to cancel the job.

10.1 Set the external button

nClick System Settingbutton in the SmartUSB wizard screen.

oClick General tab, and set external button to perform any job in Set a button task for the external button of mobile storage group.

pIt can be applied to do the following tasks:

‰Backup job: configure the Button Task, Job Name and Destination to define the external button.

‰Hub copy job: configure the Button Task, Job Name, Destination and Backup Type to define the external button.

ƒButton Task: select Copy Hub data to Mobile Storage

ƒJob Name: select the one of the following items:

-Copy data from port 1 of HUB: copy the data of pen drive inserted in port1 to mobile storage (MUS-2500 Smart USB Storage).

-Copy data from port 2 of HUB: copy the data of pen drive inserted in port2 to mobile storage (MUS-2500 Smart USB Storage).

-Copy data from all ports of HUB: copy the data of pen drives inserted in port1 and port2 to mobile storage (MUS-2500 Smart USB Storage).

64