Wireless ADSL2/2+ Modem Router User Guide
Physical Details
Front-mounted LEDs
Power LED (Green)
Status LED (Yellow)
LAN
ADSL
WLAN
Internet
Figure 2: Front Panel
On - Power on.
Off - No power.
Off - Normal operation.
Blinking - This LED blinks during start up, and during a Firmware Upgrade.
For each port, there are 2 LEDs, to indicate the connection speed (10BaseT or 100BaseT) of each port.
•100BT - This will be ON if the LAN connection is using 100BaseT, and Blinking if data is being transferred via the cor- responding LAN port.
•10BT - This will be ON if the LAN connection is using 10BaseT, and Blinking if data is being transferred via the corresponding LAN port.
•If neither LED is on, there is no active connection on the corre- sponding LAN port.
On - ADSL connection established.
Off - No ADSL connection currently exists. Flashing – ADSL is synchronizing.
On - Wireless enabled.
Off - No Wireless connections currently exist.
Flashing - Data is being transmitted or received via the Wireless access point. This includes "network traffic" as well as user data.
On - Internet connection is available. Off - No Internet connection available.
Flashing - Data is being transmitted or received via the ADSL connection.
8
