llkUW-OnK&mOU
RESIDENTIAL POWERLINE
CARRIER COMPONENTS
SINGLE POLE SWITCH MODULE
INSTALLATION INSTRUCTIONS & Wiring DiagramCat. No. 6291
mmn
TO BE INSTALLED AND/OR USED IN ACCORDANCE WITH
APPROPRIATE ELECTRICAL CODES AND REGULATIONS.
RATING: 20A-120V/ 60Hz AC ONLY
Minimum Voltage: 112V
Maximum Voltage: 138V
Maximum number of Modules per circult: 10
ENGINEERING DATA:
Input Signal 121 kHz carrier signal superimposed on a 12OV AC power line.
Mlnlmum Signal Strength: 100mV.
Ambient Operating Temperature: Minimum 0° F (-18°C) to Maxlmum 104°F (40°C).
Ambient Humidity: 0 to 90% RH, non-condensing.
DESCRIPTION:
This Wall Switch Module is designed for use with Levlton Decora Electronic Control (DEC) Powerline Carder Components. It functions as a remote control switching device which responds to ON/OFF and ALL LIGHTS ON/OFF commands, from one or more DEC controllers remotely located from the module. The switch module can also be operated manually as a standard type wall switch.
2
The module may be set to any of the 256 address codes, selected at the time of installation. The desired address Is set by removing the touchplate and selecting letter and number codes with a small blade screwdriver. The module is equipped with back wire terminals and installs easily in a standard wall box. It is suitable for incandescent and fluores- cent lighting, as well as switch controlled appliance when Dimming Is not desired.
The Cat. No. 6291 is assembled as white and an ivory color conversion kit is provlded. This product fits any color Decora Wallplate (sold separately). Additional color conversion kits are available.
SAVE THIS INSTRUCTION SHEET!
IT CONTAINS IMPORTANT TECHNICAL DATA, TESTlNG, AND TROUBLE SHOOTING INFORMA TION WHICH WILL BE USEFUL AFTER INSTAL- LATION IS COMPLETE.
IMPORTANT: Unlike standard single pole wall switches the Cat. No. 6291 also requires a neutral (white) wire for operation.
Home Automation Systems, Inc. (800)
