CONNECTING THE CAMERA HUB TO OTHER VIDEO DEVICES:
•The Camera Hub composite Video Output RCA connectors offer connection to a variety of other equipment in the Structured Media Center.
•Use the supplied composite video (RCA – to – RCA, 3 ft. cables) to connect to one or more of the following video devices:
•Leviton Video Sequencer (Cat No.
•Leviton Video Modulator (Cat No.
•Direct to TV location over second
Note: The direct to TV application requires the use of either an RCA male connector (not supplied) terminated directly on the
CAMERA HUB SPECIFICATIONS
Camera Hub Parameter | Value |
|
|
Camera Inputs | |
|
|
Camera Outputs | Composite Video, 4 each |
|
|
Input Power Connection | Center positive, 2.1 mm jack |
|
|
Input Voltage | 12 VDC (+/- 10%) |
|
|
Input Current (max) | 1500 mA |
|
|
Output Voltage to Cameras | 15 VDC (+/- 10%) |
|
|
Output Current (maximum) | 1200 mA |
|
|
Power Consumption (maximum) | 18 Watts |
|
|
Storage Temperature | |
|
|
Plug Power Supply Input Voltage | 120 VAC |
|
|
Plug Power Supply Output Voltage | 12 VDC |
|
|
Plug Power Supply Output Current | 1500 mA (minimum) |
|
|
Operating Temperature | 0° C to + 60° C |
|
|
Dimensions | Height: 5.75 (146.1 mm) |
|
|
| Width: 1.75 (44.4 mm) |
|
|
| Depth: 0.86 (21.8 mm) |
|
|
Weight | 3.2 oz. (92 g) |
|
|
TROUBLESHOOTING:
No Video from Camera RCA
•Make sure both Camera and Camera Hub have correct power. The green LED should be lit on each board.
•Plug RCA cable from Camera Hub into monitor and set to composite video signal.
No Video at Camera Hub board
• Verify all
IMPORTANT INSTRUCTIONS
1.Read and understand all instructions. Follow all warnings and instructions marked on the product.
2.Do not use this product near
3.Never push objects of any kind into this product through openings, as they may touch dangerous voltages.
4.SAVE THESE INSTRUCTIONS.
SAFETY INFORMATION
1.Never install communications wiring or components during a lightning storm.
2.Never install communications components in wet locations unless the components are designed specifically for use in wet locations.
3.Never touch uninsulated wires or terminals unless the wiring has been disconnected at the network interface.
4.Use caution when installing or modifying communications wiring or components.
5.To prevent electrical shock, each opening must be filled with a module.
LIMITED 2 YEAR WARRANTY AND EXCLUSIONS
Leviton warrants to the original consumer purchaser and not for the benefit of anyone else that this product at the time of its sale by Leviton is free of defects in materials and workmanship under normal and proper use for two years from the purchase date. Leviton’s only obligation is to correct such defects by repair or replacement, at its option, if within such two year period the product is returned prepaid, with proof of purchase date, and a description of the problem to Leviton Manufacturing Co., Inc., Att: Quality Assurance Department,
For Technical Assistance Call:
www.leviton.com
| |
Little Neck, N.Y. |
|
Tech Support: |
|
www.Leviton.com |