10
Lexicon
Controls and
Indicators
The ExpandedRemote
1. The Modes THX CINEMA (15) combines
Dolby Pro Logic decoding
and th e spectral enhance-
ments of the Lucas Film
Home THX Cinema system
to re-create film sound in
your home the way it was
heard in the final production
stages.
2. Setup
The SETUP button allows
selection and adjustment of
all the interface functions of
the CP-3 including Input and
Output leve ls, visual dis -
plays, speak er configura -
tions, etc.
3. Store
The STORE button saves in
memory the settings from the
SETUP mode and is used to
memorize and store any cus-
tomized operating modes.
4. On/Off
Turning the CP-3 off with this
button (or the front panel ON/
OFF button) deactivates the
unit while leaving power to
the signal proce ssing cir-
cuitry to keep it at optimum
operating temperature.
The CP-3 uses this button’s sig-
nal to differentiate bet ween the
remotes. Therefore it is impor-
tant that the CP-3 be turned on
with the remote control that will
be used during each listening
session. To use the other r e-
mote, simply turn the CP-3 off
(with either remote or the front
panel switch), then turn it on with
the ON/OFF button of the remote
you wish to use.
The PANORAMA
modes (1, 2 and 3)
provide enhanced
lateral sound (and
hence greater spaciousness
and envelopment) for either
music or films. This mode is
effective even using only the
two front loud spea kers.
NORMAL(1) and WIDE(2)
differ primarily in their initial
Effect Levels. BINAURAL(3)
is for playback on loudspeak-
ers of recordings made with a
dummy head mi crophone
system.
The AMBI ENCE
modes (4, 5 and 6)
simulate conc ert
halls of three dif-
ferent sizes, generating re-
flections of appropriate direc-
tionality, delay and spectral
shape, sending them to the
side and rear speakers. The
Ambience mod es provide
adju stabl e re circu latio n
through the Liv eness pa-
rameter but for long rever-
beration times, use Reverb.
Both Ambience and Reverb
are true stereo simulators.
Like A mbien ce,
the REVER B
modes (7, 8 and 9)
simulate rooms of
three sizes with the aid of
side an d rear channe ls.
These modes have fewe r
specif ic initia l reflec tions
than Ambience, but richer
and smoother reverber ant
decay. Reverb is especially
good for simulating large,
highly reverberant spaces.
SURROUND:
TV ( 10) i s de -
signed to expand
and e nhanc e a
wide range of television pro-
gramming. This mode also
allows adjustment of certain
parameters for film sound
which are not adjustable in
Mode 14. If a program is des-
ignated as being in surround,
use Pro Logic (14), or TH X
(15).
MUSIC (11) enhances music
through a unique ambience
extraction method, and can
provide spect acular results
with music that has carefully
recorded stereo information.
FULL (12) allows unproc -
essed music to be played
over all the spe akers for
background mu sic, or for
maximum acoustical output
of the system.
MONO (13) expands the
music and effects on monau-
ral films into the additional
channels while leaving the
dialog in the front center.
PRO LOGIC (14) provides
the same decoding used in
Dolby Stereo theater sys-
tems, using as many as eight
speakers for front, center,
side, rear, and subwoofer
channels.