Using

the CP-3

CP-3 Digital Surround Processor

INPUT BALANCE compensates for the occasional source with audible channel imbalance. It is especially important when using Panorama for movies. If the movie sound tracks are unbalanced, the dialog will wander away from the center; adjusting the Input Balance corrects for this.

LF WIDTH controls the amount of low-frequency spatial correction that is applied to the signal. A positive value of LF WIDTH means the difference (left minus right channel) signal has additional energy below 500 Hz, while the sum (left plus right) signal has correspondingly less. (Negative settings can compensate for recordings with too much of this property.) LF WIDTH can add needed spaciousness and warmth to classical recordings made with coincident or near-coincident miking. (See the Theory and Design booklet.)

REAR LEVEL adjusts the loudness of the signals sent to the rear channels. This control should be set so that the rear is audible without calling attention to itself.

REAR ROLLOFF sets the frequency above which the rear-channel sound is attenuated. It should be high enough to give presence and airiness to the rear sound, but not so high as to place distracting instrumental overtones or other sounds behind you. The appropriate setting will vary with the program material.

REAR DELAY adjusts the amount of time between the appearance of a signal in the front channels and its emergence from the rear. Generally, the correct delay is about 16 milliseconds but the setting depends on speaker set-up and source material. In general, the delay should not be so great that the rear sound becomes identifiable as a distinct source.

NOTE: If the system is configured with only side speakers, the REAR LEVEL, REAR ROLLOFF and REAR DELAY settings will affect the side outputs. If the system has both side and rear speakers, these parameters control them both.

In Panorama, MAIN MUTE mutes the front outputs; EFFECTS MUTE mutes the side and rear outputs.

The center channel is not used in the Panorama mode.

37

Page 39 Page 41
Page 40
Image 40
Lexicon owner manual Using CP-3
Page 39 Page 41

CP-3 specifications

The Lexicon CP-3 is a high-performance audio processor known for its exceptional sound quality and advanced features, making it a preferred choice for audiophiles and sound professionals alike. This preamplifier and audio processor delivers a remarkable listening experience, incorporating cutting-edge technologies and sophisticated design.

One of the standout features of the CP-3 is its multi-channel processing capability. With support for various audio formats, it provides an immersive surround sound experience, making it a perfect fit for home theaters and high-end audio setups. The processor boasts a robust array of inputs and outputs, ensuring compatibility with a wide range of audio equipment and allowing seamless integration into existing systems.

The Lexicon CP-3 employs proprietary technologies, such as the acclaimed Lexicon Digital Signal Processing (DSP), which delivers pristine audio reproduction with minimal distortion. This technology, combined with high-resolution audio processing, ensures that every nuance of the source material is preserved. The processor also supports various audio formats, including Dolby Atmos and DTS:X, which enhances the spatial dimension of audio playback.

Another significant aspect of the CP-3 is its user-friendly interface. The processor features an intuitive control panel and a well-organized menu system, allowing users to access and configure settings with ease. Additionally, it is equipped with a remote control for convenient operation, providing flexibility for users who prefer to adjust settings from a distance.

The build quality of the Lexicon CP-3 is impressive, reflecting the brand's commitment to durability and longevity. The chassis is designed to minimize interference and provide optimal shielding against electromagnetic noise. This attention to detail contributes to the overall sound quality, ensuring that users receive the best possible audio experience.

Furthermore, the CP-3 includes advanced room correction technologies that help calibrate the sound output based on the characteristics of the listening environment. This feature optimizes the audio performance, eliminating potential issues caused by room acoustics and providing listeners with a balanced and natural sound.

In conclusion, the Lexicon CP-3 is a versatile and powerful audio processor that excels in delivering high-fidelity sound. With its multi-channel processing capabilities, innovative technologies, user-friendly design, and commitment to quality, it stands as a formidable choice for both casual listeners and discerning audiophiles, enhancing any audio setup to new heights.
Top Page Image Contents