Using

the CP-3

CP-3 Digital Surround Processor

music. When it is on, special patented algorithms continually monitor the input signal and adjust both the relative level and time offset of the two channels to keep the dialog properly centered and special effects properly localized. This automatic feature is why the CP-3 does not have or need an input balance control for Dolby Surround decoding.

BASS SPLIT takes the low bass from the center, where it is in many film and music mixes, and distributes it instead to the left and right front-channel speakers. Bass Splitting is valuable because in many video installations the center speaker is smaller than the two main stereo speakers and less capable of handling the lowest frequencies. By directing the low frequencies to the main speakers, there is less risk of damage to a small center speaker and no loss of bass information since it will be reproduced by the main speakers.

SUB BASS BOOST boosts or cuts the subwoofer output level. Although the normal subwoofer level was set during the initial calibration procedure, with some recordings you may find it desireable to increase or decrease this deep bass level.

REAR ROLLOFF sets the cutoff frequency of a low pass filter in the rear channel . Frequencies above this setting are attenuated. This control should be set high enough to give presence and airiness to the rear sound, but not so high as to place distracting instrumental overtones or other sounds behind you. The appropriate setting will vary with program material.

REAR DOLBY B Dolby Surround decoding specifications call for a special form of Dolby B-type noise reduction for the rear (surround) channel. Since Dolby Surround encoded material should generally be listened to in the ProLogic or THX modes, this parameter is normally OFF. It can, however, be turned ON if you wish to experiment with this.

The RE-EQUALIZER equalizes the left, center and right channel outputs to match the overall frequency balance of the original recording. Without this re-equalization, many films, and some television programs, will sound too bright.

DECORRELATE electronically "scrambles" the monaural surround chan- nel to provide added spaciousness and envelopment.

SIDE SPEAKER ASSIGN determines whether the information fed to the side outputs is derived from the front left and right, or from the rear. Choosing the front setting will create a very wide soundstage, which can be very exciting on some soundtracks. On others, particularly those with panned dialog and very tight localization of sound effects, the soundstage will be too wide. Technically, the rear setting is a closer match to the original recording format.

In Television, MAIN MUTE mutes only the center output; EFFECTS MUTE mutes the center, side and rear outputs.

Bass Split

Bass Split rolls off frequencies at 6dB per octave. The values given are at the -3dB point of attenuation from the center speaker.

43

Page 46
Image 46
Lexicon owner manual Using CP-3

CP-3 specifications

The Lexicon CP-3 is a high-performance audio processor known for its exceptional sound quality and advanced features, making it a preferred choice for audiophiles and sound professionals alike. This preamplifier and audio processor delivers a remarkable listening experience, incorporating cutting-edge technologies and sophisticated design.

One of the standout features of the CP-3 is its multi-channel processing capability. With support for various audio formats, it provides an immersive surround sound experience, making it a perfect fit for home theaters and high-end audio setups. The processor boasts a robust array of inputs and outputs, ensuring compatibility with a wide range of audio equipment and allowing seamless integration into existing systems.

The Lexicon CP-3 employs proprietary technologies, such as the acclaimed Lexicon Digital Signal Processing (DSP), which delivers pristine audio reproduction with minimal distortion. This technology, combined with high-resolution audio processing, ensures that every nuance of the source material is preserved. The processor also supports various audio formats, including Dolby Atmos and DTS:X, which enhances the spatial dimension of audio playback.

Another significant aspect of the CP-3 is its user-friendly interface. The processor features an intuitive control panel and a well-organized menu system, allowing users to access and configure settings with ease. Additionally, it is equipped with a remote control for convenient operation, providing flexibility for users who prefer to adjust settings from a distance.

The build quality of the Lexicon CP-3 is impressive, reflecting the brand's commitment to durability and longevity. The chassis is designed to minimize interference and provide optimal shielding against electromagnetic noise. This attention to detail contributes to the overall sound quality, ensuring that users receive the best possible audio experience.

Furthermore, the CP-3 includes advanced room correction technologies that help calibrate the sound output based on the characteristics of the listening environment. This feature optimizes the audio performance, eliminating potential issues caused by room acoustics and providing listeners with a balanced and natural sound.

In conclusion, the Lexicon CP-3 is a versatile and powerful audio processor that excels in delivering high-fidelity sound. With its multi-channel processing capabilities, innovative technologies, user-friendly design, and commitment to quality, it stands as a formidable choice for both casual listeners and discerning audiophiles, enhancing any audio setup to new heights.