Recording a Guitar Using the Instrument Input
To set the input of the track to record from the
1.Click anywhere in the gray area (not on the buttons) of the Track 1 window
(labeled as Audio 01).
2.In the Inspector, click the IN: box and select IN 1 for the track input source.
3.In the Track 1 window, the Record Enable button 
should already be red. If it isn't, click it so that it turns red.
4.In the Track 1 window, click the Input Monitoring button 
so that it is not lit.
5.Next, adjust the input gain of the Instrument input To set the input level, strum the guitar while gradually turning up the Line 1 knob until the Peak LED lights occasionally with the loudest signals. Check the Input Bargraph Meter on the front of the Lambda Studio™ to make sure you are not clipping.
6.To begin recording, click the Record button on the Transport control. Play some chords or notes on the guitar. When you are finished recording, click Stop, then
Rewind.
7. Click the Play button to listen to the track you have just recorded.
27
